If it is an induction motor which is probably the cheapest to build slip between electrical speed and mechanical speed will depend on load. In this kind of motors there are no magnets and the magnetic field is developed by the slip.
Nicklas Karlsson On Sat, 27 Dec 2014 08:00:04 +0000 Marcus Bowman <[email protected]> wrote: > I've just taken a similar motor form our (now dead) washing machine. I took > the whole harness and all the electronics from the machine, so I may be able > to get it on the bench and give it a push and a prod sometime. > It seems to me that the motor rpm is greatly affected by the load. My > knowledge gets sketchy at this point, but I have read of control/regulation > being via back emf, used in a feedback loop inside the controller. What > puzzles me is how rpm and feedback seem detached under no-load conditions. > Nice motors, though. > Mine is labelled C. E. SET and its 800W 17000rpm. > The controller was made by Jabil Circuit who used to have a factory about 3 > miles from here. > The washing machine was a Hotpoint. We've had several, and they are not that > great. But I have to say that when I took it apart, the engineering design of > many of the components impressed me greatly. All that clever design to make > the thing easy and cheap to manufacturer. The drum mouldings are worthy of a > design museum. > > What controller are you using? > > Marcus > > > On 23 Dec 2014, at 23:37, [email protected] wrote: > > > Well, I dug through the pumphouse, found an Automation Direct GS1 drive, > > hooked it up..... set the upper frequency for 400HZ..... and it works! This > > motor has a nameplate indicating it as a 0.8KW sized motor, about 1HP for > > some of the audience. Should be very cheap to pick up. Next step is to get > > the 17,000 rpm motor speed down to something useful. > > ------------------------------------------------------------------------------ > > Dive into the World of Parallel Programming! The Go Parallel Website, > > sponsored by Intel and developed in partnership with Slashdot Media, is your > > hub for all things parallel software development, from weekly thought > > leadership blogs to news, videos, case studies, tutorials and more. Take a > > look and join the conversation now. http://goparallel.sourceforge.net > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming! The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
