On Monday, January 05, 2015 12:04:46 PM [email protected] did opine And Gene did reply: > The metalcutting ones are not center cutting, they are roundover only. > You could probably get away with a shallow helical ramp in on wood, > otherwise order a center cutting end mill 1/16 or closer if you can > find one, cut the pockets to clearance height for the roundover, do > the roundover and then finish the pockets.
Ugh. Makes my 2nd idea even tastier, cut them out with the counded corners, drop them into a dummy pocket and do the top edge roundover, which will allow me to contour the visible corners too. Thanks pc. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
