------ Original Message ------ From: "andy pugh" <bodge...@gmail.com> To: "Marius Liebenberg" <mar...@mastercut.co.za> Cc: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: 2015-01-30 15:34:16 Subject: Re: Re[4]: [Emc-users] BLDC Hal component
>On 30 January 2015 at 13:16, Marius Liebenberg <mar...@mastercut.co.za> >wrote: > >> He said I should covert to steppers for the sake of cost and I said >>No lets >> try and make the servos work. > >I think that the servos + resolvers will work a fair bit better than >steppers. I was rather upset when I found that my ebay bargain servos >had resolvers, but now I am something of a fan of the devices. I have to agree, if they are used correctly with good electronics to drive them, they are very good and they last. I have started looking at a drive using the STM32 series of MCU as there are a number of projects going on with them. There might be a modestly priced solution from that in the end. > >-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users