------ Original Message ------ From: "andy pugh" <[email protected]> To: "Marius Liebenberg" <[email protected]> Cc: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: 2015-01-30 15:57:43 Subject: Re: Re[6]: [Emc-users] BLDC Hal component
>On 30 January 2015 at 13:47, Marius Liebenberg <[email protected]> >wrote: >> I have a feeling that these have resolver and hall sensors as there >>is huge >> number of wires on the plug. More that what a resolver will need. > >That's interesting and opens up the possibility of using a number of >alternative drives. > >However, having said that the Mesa solution is expensive, if you are >buying new drives then the 8i20 is relatively cheap, it is just >expensive relative to used stuff from eBay. > >Do you have the original 200V supply for the motors on the machine? >There is a fair saving to be had by re-using that. Not sure about that. I will have to ask the man. He did seem to have a lot of the original stuff that was stripped out of the box. > >-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
