I've an idea for a project involving a pair of 9x20 9-speed quickchange gearboxes mounted side by side, with a filler between and three gears to couple the output of one to the input of the second.
I'll have the gearbox off my $50 9x20 but need another. 9 speeds on one box feeding a second box with 9 speeds... I wonder if any combinations would be duplicates? I milled out the channel in the saddle last night but not as drastic as Denford did on the ORAC Compact 8 clone. I'll be using white acetal to make the nuts and replace the wee little cross slide screw with a 3/8x10 ACME and the leadscrew with a 1/2x10 ACME. Cross slide motor out the back and addons made to not restrict the slide travel, not like how Denford cut off the rear of the slide at the nut because the ORAC had a plate attached to the rear of the saddle. --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
