On Saturday 16 May 2015 10:06:50 jeremy youngs wrote: > Here's some shop porn I hope you may find useful Gene > http://www.wmberg.com
It looks like they have a 5mm pitch line called Max-M-Drive, but I don't see any engineering data to see if its suitable for this... And I'd have to create an account to see what they are asking. Mondays project, phone call. Tell them I have a horse to transmit. It may yet take the 15mm wide belt. :) >From the OD of the 30 cogger, I'd have to say I'd have to use a 18 and a 29. But would have to bore an 8mm hub to 9mm on the 17. This one may count at 30, but the thicker belt would need more clearance than is available without ordering that plastic spacer used to do the bearing tension on this, and turning it slightly for additional clearance. OTOH, I can turn the one on the new head, and install it all in one long week of rebuild as I need to cut some spacers to preclude this shaft from working endways in the bearings. Or cut some grooves for tru-arc's. Coffee hasn't kicked in yet, still a pint low. :( And what the heck is a pin hub, a roll pin? Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
