Now I get "sudo: halcompile: command not found", Do I need to . ./scripts/rip-environment?
Were should the VMC folder actually be, or doesn't it make a difference, I have it in my configs folder, which is in the linuxcnc folder. On 6/5/2015 11:06 AM, Gene Heskett wrote: > On Friday 05 June 2015 10:54:30 Rick Lair wrote: >> I keep getting "sudo: comp: command not found" > There has been a name change Rick, it is now "halcompile" >> On 6/5/2015 10:20 AM, andy pugh wrote: >>> On 5 June 2015 at 15:12, Rick Lair <r...@superiorroll.com> wrote: >>>> ./toolchange.hal:1: Can't find module 'carousel' in >>> Yes, you do need to install the new component. >>> >>> sudo comp --install --install-doc carousel.comp >>> (carousel-comp is in the config folder when unzipped) >>> >>> The rest of the errors are something that Vismach just seems to do. > Cheers, Gene Heskett -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users