I do build from source, So should I have the VMC folder be in my "home/testpc/linuxcnc-dev/configs directory,
Then from the command line be in the "testpc@testpc:~/linuxcnc-dev/configs$" directory, Then do " sudo halcompile --install --install-doc carousel.comp" Does that sound right? On 6/5/2015 12:41 PM, Sebastian Kuzminsky wrote: > On 6/5/15 10:38 AM, andy pugh wrote: >> On 5 June 2015 at 17:34, Rick Lair <r...@superiorroll.com> wrote: >>> Now I get "sudo: halcompile: command not found", >> Wierd. >> sudo apt-get install linuxcnc-dev >> Might help, but I didn't think that was necessary, and I would imagine >> you already have it. > Yes, halcompile is part of the linuxcnc-dev package (or in your > run-in-place path, if you build from source). > > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
