Gmoccapy has a tool change button and I am not sure that the button includes the G43. I started from scratch but I did a G43 before I started and that seemed to fix the problem. The button should have the G43 I think.
------ Original Message ------ From: "John Thornton" <[email protected]> To: "Marius Liebenberg" <[email protected]>; "Enhanced Machine Controller (EMC)" <[email protected]> Sent: 2015-07-02 13:45:17 Subject: Re: [Emc-users] More tool table issues >I always load a tool with Tn M5 G43 and when touching off to the tool >table. I have some pyvcp buttons linked to some mdi commands. the first >eight change tools for me when setting up and the next two are used to >touch off the tool to the spindle for the tool table and the last one >is to touch off to the Z of the material using a 3/8" dowel. > >MDI_COMMAND = T1 M6 G43 >MDI_COMMAND = T2 M6 G43 >MDI_COMMAND = T3 M6 G43 >MDI_COMMAND = T4 M6 G43 >MDI_COMMAND = T5 M6 G43 >MDI_COMMAND = T6 M6 G43 >MDI_COMMAND = T7 M6 G43 >MDI_COMMAND = T8 M6 G43 >MDI_COMMAND = G10 L11 P#5400 Z0.0 >MDI_COMMAND = G43 >MDI_COMMAND = G10 L20 P1 Z0.375 > >JT > >On 7/2/2015 3:28 AM, Marius Liebenberg wrote: >>I am following the proposed methods for setting up the tool table as >>John had described. The thing that confuses me at the moment is this. >>I home the machine, cancell G92 offsets and then load the tool 1 with >>T1 >>M6. Now I touch off X and Z for tool one. The DRO displays the result >>as >>expected. >>I load T2 M6 and touch off X and Z and when I am finished the DRO >>still >>displays the same as with T1. Is this right or am I just getting >>confused here? >> >> >> >>----------------------------- >>Regards / Groete >> >>Marius D. Liebenberg >>+27 82 698 3251 >>+27 12 743 6064 >>------------------------------------------------------------------------------ >>Don't Limit Your Business. Reach for the Cloud. >>GigeNET's Cloud Solutions provide you with the tools and support that >>you need to offload your IT needs and focus on growing your business. >>Configured For All Businesses. Start Your Cloud Today. >>https://www.gigenetcloud.com/ >>_______________________________________________ >>Emc-users mailing list >>[email protected] >>https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
