> Gesendet: Dienstag, 07. Juli 2015 um 23:22 Uhr > Von: "Kirk Wallace" <kwall...@wallacecompany.com> > An: emc-users@lists.sourceforge.net > Betreff: Re: [Emc-users] Motherboard? > > On 07/07/2015 02:03 PM, Gerhard Pircher wrote: > ... > > I'm also thinking about upgrading the computer for my desktop mill, > > which uses servos together with a 5I20 FPGA PCI I/O card. Thus I > > wondered, if anyone tried out a ASRock Q1900M board [1] with a Celeron > > J1900 four-core onboard CPU (looks like the next generation of the > > J1800). > > > > Since the board only has PCIe slots I would need a PCIe to PCI adapter. > > Does anyone know, if there are any pitfalls in using the 5I20 card with > > such an adapter (except for mounting problems)? > > How's about this: > http://www.ebay.com/itm/281713732839 That would certainly do the job and is cheap, too.
> I believe it has one PCI and one each PCIe: > http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01163881 The PCI riser card that is needed for full-height PCI cards (according to the linked specifications) seems to be missing (HP specifies it as optional). That's a problem for the 5I20, which AFAICT is a full-height PCI card. > It gives good latency. You can isolate one core for LinuxCNC. On eBay, > watch out for shipping charges and the smaller version has no slots. > > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/ > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
