On Wednesday 12 August 2015 08:43:33 andy pugh wrote: > On 12 August 2015 at 13:36, Gene Heskett <ghesk...@wdtv.com> wrote: > > This is a case where a hardware stepgen might be needed as software > > only has a limit in output step frequency on the x86 driven pc of > > 40Khz that is largely removed by the use of something like a mesa > > 5i25 card. > > The Beaglebone has a PRU (and a Machinekit driver) that can achieve > similar step rates to the FPGA cards.
I am aware of that Andy but have no experience, which is why I mentioned the x86 platform specifically. I have thought of trying the BBB, but the comments in this thread so far are quite off-putting, No indexing and poor GFX speed would turn me off. Its gfx is slow enough on the X86 stuff, so What You See Is Not WHat You Are Getting. WYSINWYAG would be the applicable acronym. :) Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users