I know that our big machines have 7.5 kw Z axis motors, and 3.5 kw X axis motors.
On 9/17/2015 8:57 AM, andy pugh wrote: > To size motors, screws, bearings etc for my CNC lathe conversion I > have been trying to find cutting force data. > > http://www.ijera.com/papers/Vol4_issue4/Version%201/U044134144.pdf > > Seems to say that a feed force of 100N is about normal. > This seems rather less than I would have guessed. > > Does anyone else have any feel for this. I have been designing around > 2kN, and I know that many CNC lathes have multi-kW Z servos. > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
