>From the looks of things, and from Andy mentioned, it doesn't look like you have the linuxcnc-dev package installed. Installing that should fix this problem.
Mark On Fri, Oct 30, 2015 at 1:03 PM, <[email protected]> wrote: > This what locate returns for halcompile, > > > greenmill@greenmill:~$ locate halcompile > /home/greenmill/.local/share/Trash/files/linuxcnc-dev/docs/man/man1/halcompile.1 > /home/greenmill/.local/share/Trash/files/linuxcnc-dev/src/hal/utils/halcompile.g > /home/greenmill/linuxcnc-dev/docs/man/man1/halcompile.1 > /home/greenmill/linuxcnc-dev/src/hal/utils/halcompile.g > > >> -------- Original Message -------- >> Subject: Re: [Emc-users] Carousel Component >> From: andy pugh <[email protected]> >> Date: Fri, October 30, 2015 12:01 pm >> To: "Enhanced Machine Controller (EMC)" >> <[email protected]> >> >> >> On 30 October 2015 at 15:29, <[email protected]> wrote: >> > sudo: halcompile: command not found >> >> Do you have the linuxcnc-dev package installed? >> >> halcompile used to be called comp, but I think that your version is >> new enough for it to be halcompile. >> >> I am slightly surprised that you have the carousel.comp file, >> actually. And that you appear to have a linuxcnc-dev directory. >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
