2015-11-09 19:47 GMT+02:00 Jeshua Lacock <[email protected]>: > So here is example 3D printer g-code (generated from Slic3r)
Have you tried "firmware retraction" option in slic3r - IIRC it should place particular command for prime and retract moves, which you can easily "find & replace" by any means. And is there any particular reason, why you do not use Machinekit? Especially I mean velocity-extrusion (g-code does not contain extruder position commands, but defines extrusion height and width instead and extruder velocity is calculated by actual velocity of nozzle movement - this accounts for any over- or underextrusion due to acceleration or deceleration etc); Alex has published his slic3r build, which creates proper g-code out of the box. Viesturs ------------------------------------------------------------------------------ Presto, an open source distributed SQL query engine for big data, initially developed by Facebook, enables you to easily query your data on Hadoop in a more interactive manner. Teradata is also now providing full enterprise support for Presto. Download a free open source copy now. http://pubads.g.doubleclick.net/gampad/clk?id=250295911&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
