i have quite a collection of parallel port cards that don't work with Linuxcnc both pci & pcie the only ones so far i have found to work are the startech ( after patching the epp ) & one's with Oxford semi chipsets are the only ones so far iv'e found to work just about out the box .
all the cheap wch ch3b25 & CT43521 leave well alone out of 7 boards i purchased in the last month , iv'e only had 2 that worked without problems On 20 November 2015 at 17:06, Jon Elson <el...@pico-systems.com> wrote: > On 11/19/2015 11:24 PM, Gene Heskett wrote: > > Did I see the number 9815 in the chipset someplace back in > > the beginning of this thread? IIRC thats a netmos number, > > and is known to not work at this location from several > > years ago. I then bought a StarTech card, which did work. > > But that whole machine was retired when the D525MW atom > > machines became available. Cheers, > The NetMos 9805 definitely did NOT work in EPP mode at all. > The 9815 is SUPPOSED to work, and I think at least two > people have confirmed that this revised chip does work in > EPP mode. I've never checked one here so I can't say for sure. > > Jon > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
