I am using two Netmos cards on two installs (one is a 9815 and the other is a 9865), and haven't had any trouble with either one. But I am not using either one in EPP mode. I am using the ports with X-mode in Linuxcnc witch requires the ports to be set to SPP mode.
----- Original Message ----- From: "Jon Elson" <el...@pico-systems.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Friday, November 20, 2015 12:06:23 PM Subject: Re: [Emc-users] Configuring New PCI Parport On 11/19/2015 11:24 PM, Gene Heskett wrote: > Did I see the number 9815 in the chipset someplace back in > the beginning of this thread? IIRC thats a netmos number, > and is known to not work at this location from several > years ago. I then bought a StarTech card, which did work. > But that whole machine was retired when the D525MW atom > machines became available. Cheers, The NetMos 9805 definitely did NOT work in EPP mode at all. The 9815 is SUPPOSED to work, and I think at least two people have confirmed that this revised chip does work in EPP mode. I've never checked one here so I can't say for sure. Jon ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users