An update, I got the serial isolator but it did not work out of the box. It had something about DTE and DCE that I didn't understand how to tell what the GS2 uses and can't find anything about DTE or DCE in the manual...
JT On 12/25/2015 4:51 PM, John Thornton wrote: > I think a fresh thread is in order for this ordeal. > > I'm starting at the plug... I dug up some 10-3 SO cord and wired the > plug and brought that into the left cabinet. Landed the wires on some > terminal blocks with the DIN rail bolted to the cabinet with star > washers between the DIN rail and the cabinet. I also scraped the paint > off the cabinet in that area. Ground terminal blocks surround the > distribution terminal blocks (two blocks tied together). I'm also making > a print of the wiring as I go along. So from the distribution blocks the > 240v goes to the VFD filter and the control transformer. I have a second > filter for the 120v side, should that go just after the control transformer? > > JT > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
