the photo http://gnipsel.com/images/chnc/CHCN-5i20.jpg
On 1/1/2016 6:05 AM, John Thornton wrote: > I'll get a photo of what I did on my CHNC which has the motherboard just > mounted to a panel... > > JT > > On 12/31/2015 7:51 PM, Gene Heskett wrote: >> I tried to hook up my soft start circuit tonight, but when I had it wired >> in, the spindle didn't run. Checking dmesg, the card did not sign in >> like it usually does. Backed out of the mainboard socket at least 1/8", >> again. By bumping the parport cables molded connector against the wall. >> >> So I have an excedrin headache, number unk. Everytime I turn that >> computer around, to plug in a usb cable to charge my DS201, or for any >> reason, the 5i25 comes far enough out of the pci socket to disable >> something. Or blow the card. At 90 bucks a pop, that isn't fun. >> >> Do you have a bracket that can somehow hold the card into the socket? >> >> Its an LP bracket in an LP box, but it needs something to nail the card >> down into the slot a lot firmer than the LP bracket is holding it. >> >> Ideas, anybody? Or do I have to make a x-crossed-brace to go across the >> top of the pci sockets? >> >> Thanks all. :) >> >> Cheers, Gene Heskett > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users