On 5 Jan 2016, at 22:48, John Thornton wrote:
> Just leave the limits out of the ini for the rotary. > > http://linuxcnc.org/docs/2.7/html/config/ini-config.html#_axis__lt_num_gt_section > > JT Thanks, John. I see the emails from Dewey and Jon as well. I met the same problem again this afternoon, when doing extensive manual jogging (trying to get an awkward job concentric). I will try the suggested solution tomorrow. Marcus > > On 1/5/2016 4:43 PM, Marcus Bowman wrote: >> >> Anyway; for now I will try much larger limits on the odd occasion when I >> need to do this kind of rotary motion. Or do the job another way. In this >> case, the (diameter of the job + 2 x diameter of cutter) exceeded the Y >> travel on my mill, so I thought that using the rotary table was a reasonable >> solution. I could have done it in the manual lathe, but really object to the >> time that would take, so I stuck it on the mill while I got on with other >> jobs. One of the bonuses of CNC after all. >> >> Regards, >> >> Marcus >> >> > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users