I have removed mt3 by putting a bolt in the chuck and then putting something forked on the bolt above the head and using that to bang on. Best thing I've found is a "Wonder Bar" and then put a block under the other end to make it level. If the bolt slides out of the chuck jaws you may have to use a small bolt and stick the head into the chuck so it catches behind the jaws and put a nut on the bottom to hammer on. It's a lot of fiddling around, but it has worked for me.
Hope this helps. Raymond Julian Kettle River, MN The things we admire in men, kindness and generosity, openness, honesty, understanding and feeling are the concomitants of failure in our system. And those traits we detest, sharpness, greed, acquisitiveness, meanness, egotism and self-interest are the traits of success. And while men admire the quality of the first they love the produce of the second. -John Steinbeck, novelist, Nobel laureate (1902-1968) On 03/03/2016 12:59 PM, Ed wrote: > On 03/03/2016 11:14 AM, andy pugh wrote: >> On 3 March 2016 at 16:12, Gene Heskett <ghesk...@wdtv.com> wrote: >>>> Not normally. You remove Jacobs tapers with a pair of forked wedges: >>>> http://www.amazon.com/Wedge-Sets-Set-No-WEDGE/dp/B0067BSG9S/ref=sr_1_1 >>>> ?ie=UTF8&qid=1457019896&sr=8-1&keywords=jacobs+wedge >>> Luverly, just luverly... >> Especially so when the JT is bigger than the MT so there is no >> shoulder to hook on to. >> > If the shank is bad then weld a couple of pieces of square stock onto it > and lever on that. I have removed bad ones by rapping the side of the > shank sharply with a small hammer. Rude and crude and unrefined but it > works. > > Ed. > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
