Gene;

Smart move.

My ER collet chucks reside on my mills, and almost never get removed.
(boring head, cutoff saw, but do not have a drill chuck that fits the
spindles)

I do have some smaller drill chucks (expensive, good) that I have on
parallel shanks, trimmed so that they will go into an ER collet, and bottom
out, but not stick out too much, maybe 2-3mm. The shanks I have are 1/2",
so fit well within an 13-12mm collet.

Sometimes it is nice to have a (good) drill chuck for the smaller drills,
otherwise sometimes 3 hands are required (hold drill, keep spindle from
rotating, tighten ER collet nut)

John.
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to