The lines I etch but there is a drill file for the holes. I already found two converters from Excellon drill file to suitable g-code.
On Tue, 26 Apr 2016 21:19:59 -0400 Erik Friesen <e...@aercon.net> wrote: > I don't know what you are using for PCB software, but I have done this > using diptrace and vcarve. > > It works best to use a ground plane with spokes to all pads, then you > export using the dxf offset feature, and run those lines right on top. > > On Tue, Apr 26, 2016 at 1:04 AM, Nicklas Karlsson < > nicklas.karlsso...@gmail.com> wrote: > > > > On 04/25/2016 11:56 AM, Nicklas Karlsson wrote: > > > > I am looking at using linuxcnc to drill my circuit boards. There is a > > few commands in file, a tool table and coordinates. It is not possible run > > the file directly in linuxcnc. I think this kind of file could be of > > general use then a pattern of holes need to be drilled. Do anyone have any > > suggestions on how to attack it? > > > > I could in sort of see g-code in the excellon drill files but linuxcnc > > where not able to read. I also assumed many used Excellon drill files > > before. It useful both for circuit boards and picking coordinates for heat > > sink. > > > > > Although Excellon drill files are technically a dialect of > > > RS-274D (alias G-code) they are pretty far from modern > > > dialects. I wrote a program to convert it to standard > > > G-code. See : > > > http://pico-systems.com/codes/cvtexc2.c > > > and > > > http://pico-systems.com/codes/cvtexcm.c > > > > > > The first one assumes input AND output are in inch units, > > > the 2nd one takes mm in and converts to inches. > > > > > > It has been a LONG time since I used these, so definitely > > > use at YOUR PERIL! > > > > > > Probably the first program will work fine reading in mm and > > > outputting mm if you just adjust where the assumed decimal > > > point is. The code should be pretty transparent if you know c. > > > > > > Jon > > > > > > > > ------------------------------------------------------------------------------ > > > Find and fix application performance issues faster with Applications > > Manager > > > Applications Manager provides deep performance insights into multiple > > tiers of > > > your business applications. It resolves application problems quickly and > > > reduces your MTTR. Get your free trial! > > > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > ------------------------------------------------------------------------------ > > Find and fix application performance issues faster with Applications > > Manager > > Applications Manager provides deep performance insights into multiple > > tiers of > > your business applications. It resolves application problems quickly and > > reduces your MTTR. Get your free trial! > > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications Manager > Applications Manager provides deep performance insights into multiple tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users