On 04/27/2016 11:26 AM, Brian Mihulka wrote: > His youtube directive is not working, so just take the id and either search > youtube with it or put it in a watch link. I have done it below. > > https://www.youtube.com/watch?v=fBMfXbh5uY4 > > I built a contraption to do robot soldering. It had no rotation, but that is not needed in many cases. It attached a spring-loaded soldering iron held at an angle in the spindle of my mill. I built a little motor-feeder for the solder wire, and some logic to feed forward on command, then retract just a bit when the command signal ends. It basically worked, but was just a bit clunky. I refitted it to use a larger diameter solder and and have not tried it again. I think the larger solder should make it work better.
Jon ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
