I got the quote back and for $200 I can get a new one. for $100 I can get 33.4 METER-LN of the hinge material. I assume that is 33.4 meters of the hinge which is about 109.58' of hinge material. I need about 32' of hinge material for that one and would have a lot left over... now to see if I can get the old hinge out. I think a drill down from each end to clear the crimp might work.
JT On 8/15/2016 4:17 PM, John Thornton wrote: > The sliding guard for my Y axis on the BP 308 VMC fell apart. I patched > it up a bit but it fell apart again. > http://gnipsel.com/images/discovery-308/y-guard-01.jpg > http://gnipsel.com/images/discovery-308/y-guard-02.jpg > > Anyone have any ideas on what to replace that with? > > JT > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. http://sdm.link/zohodev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
