On Wednesday 28 September 2016 22:18:03 andy pugh wrote: > On 29 September 2016 at 02:48, Gene Heskett <ghesk...@shentel.net> wrote: > > Ok, checked now. No detectable continuity between powerline common > > ground, and the control circuit ground. And about .30nf capacitance > > between them. > > You need a wire
Between the control ground/common,and the ground (- supply terminal) on the Bob. And some means of translating the ground sink from 5 volts to a ground sink on the fwd and rev terminals that have 12.5 volts on them now and would expect a pull to ground to activate them.. Thats opto stuff to me. Slow level translators, but define slow. 3 or 4 microseconds of lag. Shrug. I swear I had a bag of moc-3020's, can't find them. So I bought a 4 channel 5v to 12 volt on ebay just now. At least 15 days delivery. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users