Andrew yes,many variants available, many bundles available check closely the sata specs, its not so hot,
i liked the onboard wifi but see warnings about linux and the wifi chip so, maybe i try the 9$ 'one' and the 'plus2' at 49$ still cheap :-) damn i just looked into the drawer fulla dinosaur controller boards :-( anybody wannabuy some ? :-p bari... hiya, did you pick the 'one' as the best of the litter? tomp tjtr33 On 10/23/16 17:35, Andrew wrote: > Right, now I see that they have a lot of models. Top model Plus 2 even > supports SATA, but it's $49 and needs a special $4 SATA cable. > > I wonder why they don't sell similar boards with small LCD touchscreens. > There are 5" smartphones for $50, now I would like it without SIM and > battery but with HDMI, LAN etc. > > Andrew > > 2016-10-23 12:58 GMT+03:00 Gregg Eshelman <[email protected]>: > >> Looks like 4 or 5 models on the website. If one can handle a touchscreen, >> and can somehow be interfaced to the thermostats etc. in a cooktop and >> oven, I'd be interested in modifying and old GE P7 range to replace the >> mechanical clock/timer on the front with an LCD. I'd also replace the >> burner control knobs with flat things that have an LED ring to indicate >> their settings, operated via the touchscreen. >> >> >> From: Andrew <[email protected]> >> To: Enhanced Machine Controller (EMC) <[email protected]> >> Sent: Sunday, October 23, 2016 2:43 AM >> Subject: Re: [Emc-users] Machinekit? --> LinuxCNC computer >> >> Note that there are two versions of Orange Pi: PC (1GB RAM, more >> connectors) for $15 and One (512MB and less connectors) for $10. >> I think I'd prefer 1GB. I'd buy immediately but I already have a spare Pi 2 >> ) >> Anyways, incredible prices! >> >> Andrew >> >> 2016-10-23 1:06 GMT+03:00 Dave Cole <[email protected]>: >> >>> I went to the orangepi.org page and clicked on sellers and it can be >>> bought for $9.99! Wow.. crazy! 8-) >>> The cords will cost more than the computer! >>> I think I need to raid the spare change jar and buy a few computers. >>> Dave >>> >>> >>> On 10/22/2016 3:52 PM, Nicklas Karlsson wrote: >>>> Seems like a cheap good LinuxCNC computer, maybe a split between user >>> interface and real time is not needed. If I get it correct software is >>> stored in flash and then I guess it also boot fast. >>>> >>>> On Sat, 22 Oct 2016 13:44:47 -0500 >>>> bari <[email protected]> wrote: >>>> >>>>> The Orange pi is ~$15 and uses the Allwinner H3. >>>>> >>>>> http://www.orangepi.org/orangepione/ >>>>> http://linux-sunxi.org/H3 >>>>> https://www.aliexpress.com/item/Orange-Pi-PC-linux-and- >>> android-mini-PC-Beyond-Raspberry-Pi-2/32448079125.html >>>>> It has native Ethernet (not over USB) so it can use hm2_eth with Mesa >>>>> 7i92 FPGA. >>>>> >>>>> Axis runs pretty smoothly at HD res using llvmpipe since it has 4 >> cores. >>>>> Runs without anything TI or Machinekit. >>>>> >>>>> -Bari >>>>> >>>>> On 10/19/2016 11:26 PM, Nicklas Karlsson wrote: >>>>>>> ... >>>>>>> While I use many BeagleBones to control various machines exactly the >>>>>>> way you describe (using an HDMI monitor and KB/Mouse connected to >> the >>>>>>> BBB), it is not nearly the same user experience as running on an x86 >>>>>>> PC. Everything is noticeably slower on the BBB, and graphics >>>>>>> performance is particularly horrid (to the point that the 3D preview >>>>>>> display is essentially unusable). >>>>>> Sound like the real time stuff on Raspberry or BBB and an ordinary >>> computer for user interface is the way to go for all systems with an >>> ordinary user interface. >>>>>> ------------------------------------------------------------ >>> ------------------ >>>>>> Check out the vibrant tech community on one of the world's most >>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>> ------------------------------------------------------------ >>> ------------------ >>>>> Check out the vibrant tech community on one of the world's most >>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> ------------------------------------------------------------ >>> ------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> _______________________________________________ >>>> Emc-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> ------------------------------------------------------------ >>> ------------------ >>> Check out the vibrant tech community on one of the world's most >>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
