On Wednesday 14 December 2016 08:16:42 andy pugh wrote: > On 14 December 2016 at 12:54, Gene Heskett <[email protected]> wrote: > > And now its crashed. > > It is in the amanda disklist, and it crashed in the middle of being > > backed up. > > Can you roll it back to when it worked? Isn't that the point of > backups?
Haven't tried, its been screwed for close to the time limit of my backup storage setup. Amanda is setup for a 30 tape disk image, and it recycles vtape 1 on the 31st backup. I do have 2 or 3, from the size, nearly full backups on the late November tapes. But, I think, in placing those jumpers (they all check as being on the correct pins, I've checked the list twice this morning) but I suspect I may have blown a gpio in the pi. I got the zero'd out cookie everytime I tried to load hm2_rpspi the first time. Do we have an "exercise pin#" program where I can either watch on a scope, or monitor the output pins with an input pin? Independent of anything LCNC related of course. 2 of the signal output pins are sitting at ground and 2 are at 3.3 volts, and unplugging the jumper from the 7i90 makes no difference, so I don't think I've crowbared a 7i90 pin. Something similar to the parport checker from yester decade. Thanks Andy. Oh, the excludes were installed. There were some options in /boot/cmdline.txt that stopped the crashing, can you tell if they've been installed in this /boot/cmdline.txt file? dwc_otg.fig_fsm_enable=0 dwc_otg.fig_enable=0 dwc_otg.nak_holdoff=0 dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait usbhid.mousepoll=0 quiet splash plymouth.ignore-serial-consoles I think its the 3rd thru 5th above. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
