Hi Nicklas, I have a large Makino wire EDM with a working envelope of 1200x900x300mm with UV axes for tapered cutting. I also am looking to update the machine but have other projects in front of it. One neat feature of my wire machine is edge finding and locating the center of a hole if re-positioning material. Realigning the coordinate system based on a new position or rotation of the material would be nice by locating the center of a pair of holes. My Makino supports some of this already but it is a 1980 reel to reel mag tape machine and the controller is not too practical today.
Is yours a ram or wire machine? If wire, have you worked out movement history to back a wire out of the material? Dennis > From: Nicklas Karlsson <nicklas.karlsso...@gmail.com> > > Yes I am retrofitting an old EDM machine. It have been a year two before I > started but finally I have all the needed hardware. As is now I am > starting to think about user interface and could vaguley remember somebody > talked about it earlier, worst problem is probably I am not totally sure > what is exactly needed and then it come to motions basically have very > little knowledge what moves might be useful. ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/intel _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users