On 1 February 2017 at 16:13, Kirk Wallace <kwall...@wallacecompany.com> wrote: > . Do D1-4 mounts go both > ways?
I don't know. How interesting. Are there any marks around the camlock squares? Normally there are little marks that show when you are in the safe range. You take out the locking screw and screw the pins in and out to get the pointer between the marks. It might be worth getting a good-quality backplate or face-plate to use as a gauge if you re-grind the nose. The chuck should pull up far enough onto the taper to touch the flat face (ie, no gap). -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
