On 1 February 2017 at 16:13, Kirk Wallace <kwall...@wallacecompany.com> wrote: > http://www.tools-n-gizmos.com/specs/Lathe_Spindle_Mount.html > > but mine is a little different than the one shown in the link above. The > linked spindle shows the cam is just clockwise of the chuck pin puller > hole. Mine is counter clockwise which suggests that the locking motion > is different.
That photo looks suspiciously like the one on lathes.co.uk http://www.lathes.co.uk/latheparts/page9.html And I suspect has been flipped or mis-drawn. The ISO standard (702-2) seems quite clear that the pins are clockwise of the cams. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
