re: other technogies...
if you can drill it, it'll be faster
a good applications engineer from a good company
can read your specs and give you tools and tooling that will do the job
it may be expensive but its pretty guaranteed and even proven on your 
test parts
tomp

On 02/11/17 05:42, Jim Craig wrote:
> On 2/10/2017 4:16 PM, andy pugh wrote:
>> On 10 February 2017 at 21:59, Jim Craig <jimcraig5...@windstream.net> wrote:
>>> The more I think about the actual process and needs of the machine I am
>>> thinking that a small hole EDM drilling head would be better for this
>>> application.
>> Maybe consider lasers (and sharks?) too:
>> https://www.oxfordlasers.com/laser-micromachining/applications/fuel-injector-production/
>>
>>
> But that would cost 1 million dollars.
>
> Seriously though, lasers are expensive. I actually considered lasers
> first and went back to a regular spindle.
>
> Thanks Andy,
>
> Jim
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to