2017-02-15 22:46 GMT+02:00 Valerio Bellizzomi: > > Thanks, I just placed an order > > btw, my spindle does not have an encoder so I will not do threading and > I do not need a 'reverse' signal, only a 'forward' signal, and the > enable signal is going to be wired together with axis enable and > connected to the Amplifier Enable pin, so that a single amplifier enable > signal commands the axes and spindle. >
I'm not sure why you want to wire them together. There are many situations when I want my axes enabled but spindle disabled. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users