Atmel's Windows based IDE can also be used with avrdude as an interface with M$. With that you can load into the Arduino USB port as well.
The software is really nice for being free. Dave On 2/27/2017 1:38 AM, Erik Christiansen wrote: > On 26.02.17 17:55, Martin Dobbins wrote: >> At some point in the future you might want to alter fuses; Atmel bare >> chips ship using the onboard 8Mhz oscillator and divide the result by >> 8. If you want a chip to perform as it does on an arduino board with >> an external 16Mhz crystal you have to change fuses (and you can with >> Studio 7), ... > For programming flash, eeprom, & fuses, there's also avrdude: > > $ apt-cache search avrdude > avrdude - software for programming Atmel AVR microcontrollers > avrdude-doc - documentation for avrdude > > which doesn't require admitting M$ onto the property. :-)) > > I've used that with a venerable STK500 for nearly two decades now. > It supports all sorts of DIY & buy-it-off-the-intertubes programming > adaptors, parallel, serial, or USB. > > Erik > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
