On Thursday 30 March 2017 15:21:48 John Kasunich wrote: > Why can't it be as 120mm diameter x 5mm thick disk? > > On Thu, Mar 30, 2017, at 09:00 AM, andy pugh wrote: > > On 30 March 2017 at 13:41, Cristian Bontas <[email protected]> wrote: > > > You could turn a cylinder that fits snugly in the large hole. > > > > Certainly a possibility, but at 120mm quite a big chunk of material > > to use just as a jig. > > You only need that spacer directly under the clamps, Andy. Your part looks plenty rigid enough as long as the shims are parallel, and placed directly under the clamps so that a ton of pressure per clamp isn't going to warp it. > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > > -------------------------------------------------------------------- > >---------- Check out the vibrant tech community on one of the world's > > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
