Yeah I noticed those. Thing is, that's 32kg. It's heavy because it's 9KW but that's far more power than I'd ever use. I'd have to do a stepup from our 208v 3ph to even power it.
I do like to do 3d carving, at 32kg that's just not practical, that'd have to be moved really slowly. Danny ---- Todd Zuercher <[email protected]> wrote: > I think it will depend on your uses. For Us I think I'd be more inclined to > go with one of these Chinese HSD knockoffs. > http://www.ebay.com/itm/9KW-220V-380V-ATC-Spindle-Motor-Air-Cooled-Short-Nose-BT30-24000rpm-Replace-HSD-/201831379913?var=&hash=item2efe1673c9:m:mQD4-vmKjabnXvCs-RHemqQ > > ----- Original Message ----- > From: [email protected] > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Cc: "hubert" <[email protected]> > Sent: Thursday, May 11, 2017 12:42:35 PM > Subject: Re: [Emc-users] Anyone done an ATC? > > Which spindle did you get? Options that looked appealing to me: > > http://www.ebay.com/itm/1-8KW-ATC-Water-Cooled-Automatic-Tool-Change-Spindle-Motor-ISO20-220V-5-4A-CNC-/112396640759?hash=item1a2b5ca1f7:g:5UIAAOSwawpXtUTl > > http://www.ebay.com/itm/2HP-1-5kw-24000RPM-ISO20-3-bearings-Automatic-Tool-Changes-ATC-Spindles-/262522320679?hash=item3d1f8cb727:g:9NYAAOSwRJ9Xhg6v > > Danny > > ---- hubert <[email protected]> wrote: > > Jan did one for my Mill. It uses BT30 tool holders. I am not familiar > > with tool holding on the router. We used the carousel component for > > storage and presentation of the tool. We used pneumatic cylinders for > > draw bar and movement of the tool to and from the spindle. We also had > > to make sure the spindle stopped in the right orientation for the tool > > change. > > > > Hubert > > > > > > On 5/11/17 8:33 AM, Les Newell wrote: > > > I have done a lathe ATC, which was fairly painless. I have a router that > > > is due for a retrofit and it has an ATC. I'll probably be starting on it > > > sometime around July/August. > > > > > > There are various ways to do tool changers. My lathe ATC uses a Python > > > script which I wrote as a quick hack though it works so well I never > > > bothered to turn it into a proper hal module. For the router I'll > > > probably use ClassicLadder. > > > > > > Les > > > > > > On 09/05/2017 21:17, [email protected] wrote: > > >> I'm hoping to do an ATC router (primarily wood) next. Does anyone have > > >> experience doing that with LinuxCNC? > > >> > > >> I do see some $2000 spindle options. Any recommendations? > > >> > > >> Thanks, > > >> Danny > > >> > > > > > > ------------------------------------------------------------------------------ > > > Check out the vibrant tech community on one of the world's most > > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
