Danny where are you located, if you are in the Austin Tx area I am just 60 miles north of you.
My spindle is belt driven by an AC servo motor max 8000 RPM. While I do have an addon 20000 RPM Spindle for Micro Machining it is not ATC capable. Hubert On 5/11/17 11:42 AM, [email protected] wrote: > Which spindle did you get? Options that looked appealing to me: > > http://www.ebay.com/itm/1-8KW-ATC-Water-Cooled-Automatic-Tool-Change-Spindle-Motor-ISO20-220V-5-4A-CNC-/112396640759?hash=item1a2b5ca1f7:g:5UIAAOSwawpXtUTl > > http://www.ebay.com/itm/2HP-1-5kw-24000RPM-ISO20-3-bearings-Automatic-Tool-Changes-ATC-Spindles-/262522320679?hash=item3d1f8cb727:g:9NYAAOSwRJ9Xhg6v > > Danny > > ---- hubert <[email protected]> wrote: >> Jan did one for my Mill. It uses BT30 tool holders. I am not familiar >> with tool holding on the router. We used the carousel component for >> storage and presentation of the tool. We used pneumatic cylinders for >> draw bar and movement of the tool to and from the spindle. We also had >> to make sure the spindle stopped in the right orientation for the tool >> change. >> >> Hubert >> >> >> On 5/11/17 8:33 AM, Les Newell wrote: >>> I have done a lathe ATC, which was fairly painless. I have a router that >>> is due for a retrofit and it has an ATC. I'll probably be starting on it >>> sometime around July/August. >>> >>> There are various ways to do tool changers. My lathe ATC uses a Python >>> script which I wrote as a quick hack though it works so well I never >>> bothered to turn it into a proper hal module. For the router I'll >>> probably use ClassicLadder. >>> >>> Les >>> >>> On 09/05/2017 21:17, [email protected] wrote: >>>> I'm hoping to do an ATC router (primarily wood) next. Does anyone have >>>> experience doing that with LinuxCNC? >>>> >>>> I do see some $2000 spindle options. Any recommendations? >>>> >>>> Thanks, >>>> Danny >>>> >>> ------------------------------------------------------------------------------ >>> Check out the vibrant tech community on one of the world's most >>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> >> ------------------------------------------------------------------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
