Hi Gene, Tell me about it. 8-). I became distracted with work-work projects starting with a really big LED light show project and from there it just hasn't stopped. But this summer was kind of the breaking point. I decided I needed to spend some more time on me rather than everyone else.
Using my ELS again with only the Z axis powered on my South Bend has me re-thinking Linux on the Beagle but until Fredieric RIBLE's post I didn't think lathes were possible with the BBB and MachineKit. I need to finish watching his video. His is a most impressive accomplishment! What I have done with my ELS, again about 7 years ago, was port the Microchip CANopen stack to the PIC18 and enough to have it create key press messages and respond to message numbers and data for the screen. Since it also has an MPG the potential for a simple front end for a Beagle is there as a control panel with real buttons while displaying graphical stuff out the HDMI. Maybe when I retire I can find the time... John > The what if's looking down this path are endless, John. I need more room > to play (and time too) than I have, darn it. > > Now, right now, I need the command line option to make "make" about 100x > as verbose so I can trace an attempted build of a rock64 version of > hm2_rpspi to see where its failing. > > This is not a heck of a lot to go on: > > rock64@rock64:~/linuxcnc-dev/src$ make > Reading 190/190 dependency files > Done reading dependencies > Reading 197/198 realtime dependency files > Done reading realtime dependencies > Linking ../rtlib/hm2_rkspi.so > ld: no input files > Makefile:997: recipe for target '../rtlib/hm2_rkspi.so' failed > make: *** [../rtlib/hm2_rkspi.so] Error 1 > > I need to see whats up that leads to the link error. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
