Good call. I like this. (It's a joke isn't it?)
2017-12-05 0:42 GMT+08:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > On Tue, 5 Dec 2017 00:37:03 +0800 > 王若溪 <thuwr...@gmail.com> wrote: > > > I'm writing some auto measurement G-code program using my CNC mill and a > > touch probe. > > Seems that LinuxCNC doesn't want to stop when the probe is tripped > during a > > non-probe move if the machine is running a G-code program. > > Currently, I'm replacing every non-probe move with G38.3. After it's > > execution, signal an error if the current position is not commanded > > position (which indicates that the probe was tripped during this move), > > continue if current position matches commanded. > > > > Any thoughts? > > Yes, connect touch to stop signal. > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- 王若溪 清华大学 航天航空学院 航硕161班 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
