> On 1 Apr 2018, at 16:01, Gene Heskett <ghesk...@shentel.net> wrote: > > But the thought has come to mind that for series production, I also need > a jig to hold these R8's when they arrive in order to cut the slot in > one leaf of 3 leaf design, to make that cut in the lip for the keying > screw. I see a lot of similar gizmo's for 5C tooling, but haven't > tripped over one made to do the same thing to an R8.
The 5C ones are for holding a workpiece in a 5C collet, not for holding a 5C collet. With both collet types you would need to grip something in the collet in order to clamp up tight. R8 is meant for cutter holding. What would be the application of an R8 Spin indexing fixture? ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
