Obviously one needs something *in* the collet. > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: Sunday, April 01, 2018 3:29 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] R8 holder jig? > > On 1 April 2018 at 20:22, Ken Strauss <ken.stra...@gmail.com> wrote: > > Perhaps I completely misinterpret your sketch but... > > What is wrong with inserting the R8 collet into an ER40 collet block > > (available from ArcEuro and I'm certain other suppliers)? Clamp the > > collet block in your vise and do the deed. > > The collets are split and will wobble, vibrate and deflect if only clamped > by > the body. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > - George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most engaging > tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
