On 24 April 2018 at 20:59, jeremy youngs <jcyoung...@gmail.com> wrote:
>> Dell optiplex 620 2.8 GHz duo core , 4gb ram , running through the >> motherboard epp as I had seen a couple post you made on the forum about pci >> boards being sketchy, although I have had no issues running stepper drives >> with it. It should be noted, I updated this lcnc install 2 months ago and >> the system has been in use for years as an epp- stepper system. I suggest lying to PnCConf. Tell it you have a 7i43. Then edit the INI file to change the board and driver to 7i90 and hm2_7i90. You should be able to show that the card works like this: halrun loadrt hostmot2 loadrt hm2_7i90 ioaddr=0x378 show pin then you can quit halcmd quit -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
