> > And that brings up the third question about a 4th axis. If you have one, do > you tend to put it on the left just like a lathe spindle or on the right? > Any reason for the preference? Often there are tool changers on the left so > it makes more sense to have the 4th on the right.
My mill is a benchtop-style arrangement, rather than a Bridgeport-style knee mill. My 4th Axis is based on a large diameter rotary table, mounted on its side. I always put my 4th axis on the left, because if I put it on the right, it would foul the quill handle, if I used it. Separate quill feed is manual, and although I can't recall the last time I used that handle in conjunction with the 4th axis, it's always a possibility. That position means feeds along the work at -ve X, which is not intuitively convenient, but I live with it. Marcus ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users