While trying to get a reverse control over this POS, I noted that the default was reversed, so I traded the 2 U & V wires to the motor to make it run fwd.
This is toward the end of March, but as of this afternoon its default, can't change it w/o moving UV again, is now its running bass ackwards again. Then, I note after I had unplugged the hoses from the pump in order to re-route them thru the new cable chains, that the pump wasn't. Power is being switched on queue.. Pull pump out of water, note its slightly warm. Made sure power was off and popped the end covers, discover its a PM armature with pretty strong cogging. Put front cover back on as its also the front bearing. Apply power, and 8 or 10 pokes at turning it, It takes off again. Its not stiff or dragging. Stop AC to it, stops, start it, runs. Several times. So obviously it can't be trusted. I've a mind to just order another pump and a vfd. I am plumb sick of screwing with this documentless piece of Chinese shit vfd. I want to actually USE it before I fall over... Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
