Joe
On 04/23/2019 10:27 PM, Joe Hildreth wrote:
Tomp, Can you give me the chipset ID and what IO the card has? (#
Parallel Ports and # serial Ports) Joe
lspci -vknn
reports
....snip...
04:00.0 Parallel controller [0701]: NetMos Technology PCI 9865 Multi-I/O
Controller [9710:9865] (prog-if 03 [IEEE1284])
Subsystem: Device [a000:2000]
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d2b0 [size=8]
I/O ports at d2a0 [size=8]
Memory at d0423000 (32-bit, non-prefetchable) [size=4K]
Memory at d0422000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
04:00.2 Parallel controller [0701]: NetMos Technology PCI 9865 Multi-I/O
Controller [9710:9865] (prog-if 03 [IEEE1284])
Subsystem: Device [a000:2000]
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d290 [size=8]
I/O ports at d280 [size=8]
Memory at d0421000 (32-bit, non-prefetchable) [size=4K]
Memory at d0420000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
....snip...
the board itself has printing...
SY-PCI10002 on a glued label
-----------
MM-PIO9865-V2.0
Made In CHina in white on pcb
-----------
MCS9865IV=AA
PCJCL9-010
1515
FSA0AC229AB on the main chip
-----------
G536PIO9865V2.0 in green on green mask
the 2nd parport is accessed on an ide header.
theres places for 2 serials but not populated.
hth
tomp
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
