https://beagleboard.org/ai
~$100 And once again, no open 3d accel drivers. Come on TI, use mali or Vivante or open the drivers. The world will not end (sky fall, pigs fly, etc) if you do. Depending on my profit motives I can make a board now for less using a $6 4-8 core ARM SOC with mali gpu (Allwinner, Rockchip) and a few STM32's for stepping or a <$25 FPGA. -Bari On 6/13/19 11:15 AM, John Dammeyer wrote: > We've been discussing various kinds of modules to make a dedicated LinuxCNC > processor. This may just be it. > https://beagleboard.org/blog/2019-05-16-beaglebone-ai-preview > > https://beagleboard.org/ai > > With 4 PRUs to deal with the hardware the biggest issue might be access to > enough pins to do everything one needs. > > John > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
