That part is perfect. Didn't know there were opto's like that out there that could have a VCC of 10V. Thanks John
> -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: October-05-19 11:24 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Spindle Speed Control. > > On Sat, 5 Oct 2019 at 12:03, John Dammeyer <jo...@autoartisans.com> > wrote: > > > > > How are you generating the 0-10V? > > > Here is one way: > https://photos.app.goo.gl/dR3dNvnnyuj31yQ37 > > In fact my mill might be using that. I would need to look :-) > > It's something that you can "dead-bug" and have in the middle of a cable in > heat-shrink. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1916 > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users