It is the luck of the draw.... PCI will be issue. I use a laptop for testing. I use mesa Ethernet cards and work great with my laptop.. Rt_preempt does seem to work well on laptops. From my experience - turn off as much power saving as possible and turn off hyper threading. Idle=poll in the kernel line.
https://youtu.be/WZ60jBCT94w On Sat, Nov 30, 2019, 6:50 PM andrew beck <andrewbeck0...@gmail.com> wrote: > Hey guys. > > I saw that some guys are using laptops with linuxcnc. I only want them for > testing. Just wondering what laptops are good and any tricks to set it > up. I'm using Mesa pci cards so that might be a problem with a laptop. > But any ideas would be appreciated. > > Regards. > Andrew > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users