My current laptop is an msi gs60 (4th gen i7. I have also had good real-time performance from some lenovos. I would have to look at what I have.
On Sat, Nov 30, 2019, 8:32 PM andrew beck <andrewbeck0...@gmail.com> wrote: > OK I'll have a try. Just out of curiosity. What is your laptop specs? I > have a friend who is a computer tech and I'm have gotten to about 9 > computers from him at the moment. So we have some to play with. > > On Sun, Dec 1, 2019, 2:26 PM Sam Sokolik <samco...@gmail.com> wrote: > > > It is the luck of the draw.... PCI will be issue. I use a laptop for > > testing. I use mesa Ethernet cards and work great with my laptop.. > > Rt_preempt does seem to work well on laptops. From my experience - turn > > off as much power saving as possible and turn off hyper threading. > > Idle=poll in the kernel line. > > > > https://youtu.be/WZ60jBCT94w > > > > On Sat, Nov 30, 2019, 6:50 PM andrew beck <andrewbeck0...@gmail.com> > > wrote: > > > > > Hey guys. > > > > > > I saw that some guys are using laptops with linuxcnc. I only want them > > for > > > testing. Just wondering what laptops are good and any tricks to set it > > > up. I'm using Mesa pci cards so that might be a problem with a laptop. > > > But any ideas would be appreciated. > > > > > > Regards. > > > Andrew > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
