Well, today I purchased the 7i52S to finally have my setup completed. I was
checking the spindle manual today and I found it can be driven by pulses
too, so I don't need to have an analog out for that. That takes the 7i33
out of the game for this machine.
So to sum up, this is how is going to be (last time I described this I
forgot I already had a 7i73):
----- 7i73 <----> Pendant, and buttons on the main
panel
/
----> 7i44 -----7i71 <-----Sensors, limit switches, etc...
/ \
6i24 -----7i70 ---->Relays
\
-----7i52S <----> Servos step+dir out / Spindle out with stepper
in velocity mode / Spindle encoder in
Is there a bit file for such a configuration ? Or a new one has to be done?
If you can help me out it would be awesome. I'll also try to play a little
bit with Xilinx ISE and the source files but I think it will take a while
for me to get used to make my own bit files.
Thank you guys as always.
Leonardo
El lun., 16 dic. 2019 a las 19:35, Gene Heskett (<ghesk...@shentel.net>)
escribió:
> On Monday 16 December 2019 16:28:30 andy pugh wrote:
>
> > On Mon, 16 Dec 2019 at 20:19, Gene Heskett <ghesk...@shentel.net>
> wrote:
> > > But, why do you think you need it?
> > >
> > > Theres one place in the misters control where on the 6040 where I
> > > could stand to defeat the D designation by makeing a logic 1 true,
> > > srcing to drive instead of sinking it.
> >
> > I think that the source/sink is a hardware thing, not changeable by
> > firmware. Otherwise 7i76 / 7i76D would be a firmware difference, not a
> > separate part.
>
> Yes. So I put in a relay to shut it off when "mist" is disabled. Works
> well.
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> If we desire respect for the law, we must first make the law respectable.
> - Louis D. Brandeis
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
