By the way, the board is the 6i24-25. I don't know if I pointed out that earlier.
El mar., 17 dic. 2019 a las 20:43, Leonardo Marsaglia (< ldmarsag...@gmail.com>) escribió: > My mistake. 7i70 is for inputs and 7i71 for outputs. > > ----- 7i73 <----> Pendant, and buttons on the main > panel > / > ----> 7i44 -----7i70 <-----Sensors, limit switches, etc... > / \ > 6i24 -----7i71---->Relays > \ > -----7i52S <----> Servos step+dir out / Spindle out with stepper > in velocity mode / Spindle encoder in > > El mar., 17 dic. 2019 a las 20:38, Leonardo Marsaglia (< > ldmarsag...@gmail.com>) escribió: > >> Well, today I purchased the 7i52S to finally have my setup completed. I >> was checking the spindle manual today and I found it can be driven by >> pulses too, so I don't need to have an analog out for that. That takes the >> 7i33 out of the game for this machine. >> >> So to sum up, this is how is going to be (last time I described this I >> forgot I already had a 7i73): >> >> >> ----- 7i73 <----> Pendant, and buttons on the main >> panel >> / >> ----> 7i44 -----7i71 <-----Sensors, limit switches, etc... >> / \ >> 6i24 -----7i70 ---->Relays >> \ >> -----7i52S <----> Servos step+dir out / Spindle out with stepper >> in velocity mode / Spindle encoder in >> >> Is there a bit file for such a configuration ? Or a new one has to be >> done? >> >> If you can help me out it would be awesome. I'll also try to play a >> little bit with Xilinx ISE and the source files but I think it will take a >> while for me to get used to make my own bit files. >> >> Thank you guys as always. >> >> Leonardo >> >> >> El lun., 16 dic. 2019 a las 19:35, Gene Heskett (<ghesk...@shentel.net>) >> escribió: >> >>> On Monday 16 December 2019 16:28:30 andy pugh wrote: >>> >>> > On Mon, 16 Dec 2019 at 20:19, Gene Heskett <ghesk...@shentel.net> >>> wrote: >>> > > But, why do you think you need it? >>> > > >>> > > Theres one place in the misters control where on the 6040 where I >>> > > could stand to defeat the D designation by makeing a logic 1 true, >>> > > srcing to drive instead of sinking it. >>> > >>> > I think that the source/sink is a hardware thing, not changeable by >>> > firmware. Otherwise 7i76 / 7i76D would be a firmware difference, not a >>> > separate part. >>> >>> Yes. So I put in a relay to shut it off when "mist" is disabled. Works >>> well. >>> >>> Cheers, Gene Heskett >>> -- >>> "There are four boxes to be used in defense of liberty: >>> soap, ballot, jury, and ammo. Please use in that order." >>> -Ed Howdershelt (Author) >>> If we desire respect for the law, we must first make the law respectable. >>> - Louis D. Brandeis >>> Genes Web page <http://geneslinuxbox.net:6309/gene> >>> >>> >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
